Latest videos

  1. 20ft Rocket Candy Fuse. 4 Seconds. Can It Be Done?
  2. PCB Death Match 001: 1oz vs 2oz Copper
  3. Combine Laser and Lowrider CNC Table

Voltage Divider Calculator

Two resistors in series split a voltage. Set the input voltage and the top resistor (R1), then drag R2 and watch the output voltage and the current change. You can also click or drag right on the graphs.

How it works

The same current flows through both resistors, so each one gets a share of the voltage in proportion to its resistance:

Vout = Vin × R2 ÷ (R1 + R2)
Current: I = Vin ÷ (R1 + R2)

When R2 equals R1, you get exactly half. Make R2 ten times R1 and you get about 91% of Vin. Make it a tenth of R1 and you get about 9%.

Watch out for the load

Whatever you connect to Vout sits in parallel with R2 and pulls the output down. A rule of thumb: keep the load at least 10 times bigger than R2. Or type the load into the calculator to see the real output.

Big or small resistors?

Small values waste current and turn it into heat. Big values waste almost nothing, but the output sags as soon as anything draws current from it, and it picks up more noise. For feeding a microcontroller’s analog input, a total of about 10 kΩ is a common starting point. A voltage divider is for signals and reference voltages, not for powering things: use a regulator for that.