Latest videos

  1. 20ft Rocket Candy Fuse. 4 Seconds. Can It Be Done?
  2. PCB Death Match 001: 1oz vs 2oz Copper
  3. Combine Laser and Lowrider CNC Table

Parallel Resistor Calculator

Resistors side by side, with the same voltage across each one. Set R1, drag R2, and add more resistors if you like. Watch the total resistance and how the current splits between them. You can also click or drag on the graphs.

How it works

Every resistor in parallel has the full voltage across it, so each one draws its own current: I = V ÷ R. The total current is all of those added up. That’s why adding a resistor in parallel always lowers the total resistance: it’s one more path for current.

1 ÷ R total = 1 ÷ R1 + 1 ÷ R2 + 1 ÷ R3 …
For just two: R total = (R1 × R2) ÷ (R1 + R2)

Handy shortcuts

The total is always smaller than the smallest resistor. The first graph shows this: however big R2 gets, the total never reaches the dashed line.

Two equal resistors in parallel give half of one. Ten equal ones give a tenth. A much bigger resistor in parallel barely changes anything, because it takes only a sliver of the current.

The smallest resistor takes the biggest share of the current, and gets the hottest.