Latest videos

  1. 20ft Rocket Candy Fuse. 4 Seconds. Can It Be Done?
  2. PCB Death Match 001: 1oz vs 2oz Copper
  3. Combine Laser and Lowrider CNC Table

Ohm’s Law Calculator

Type any two of voltage, current, resistance and power, and the other two are worked out for you. The graphs show what happens around that point, and you can click or drag on them to try other values.

The formulas

V = I × R: voltage equals current times resistance.
P = V × I: power equals voltage times current.

Put those two together and you get the rest: I = V ÷ R, R = V ÷ I, P = I² × R, P = V² ÷ R.

Why the power graph curves

Double the voltage across a resistor and the current doubles too, so the power goes up four times. That’s why a resistor that’s fine at 5 V can smoke at 12 V. The third graph shows the other side: at the same voltage, a smaller resistor lets more current through and gets hotter.

Picking a resistor wattage

A resistor’s power rating is the most it can take, and at that rating it gets hot. The calculator suggests the smallest common rating that’s at least twice the power, which keeps it comfortable. Most small through-hole resistors are ¼ W.